• An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
Preparation and Awareness are Keys to a Safe Harvest | Print |  Email

Preparation and Awareness Are Keys to a Safe Harvest

Harvest season is one of the busiest times of year for farmers—and among the most dangerous. Before taking to the fields, the Safe Electricity program urges farm workers to be aware of overhead power lines and to keep equipment and extensions far away from them. Safe Electricity
Grain transfer near electric wires encourages farm managers to share this information with their families, and workers to keep them safe from farm related electrical accidents.

Start each morning by planning your day’s work. Know what jobs will happen near power lines, and have a plan to keep the assigned workers safe.

  • Keep yourself and equipment 10 feet away from power lines in all directions, at all times.
  •  Use care when raising augers or the bed of a grain truck. It can be difficult to estimate distance and sometimes a power line is closer than it looks. Use a spotter to make certain you stay far away from power lines.
  • Always lower portable augers or elevators to their lowest possible level, under 14 feet, before moving or transporting them. Wind, uneven ground, shifting weight or other conditions can cause you to lose control of equipment and make contact with power lines.
  • Be aware of increased height when loading and transporting larger modern tractors with higher antennas.
  • Never attempt to raise or move a power line to clear a path. If power lines near your property have sagged over time, call your utility to repair them.
  • Don’t use metal poles when breaking up bridged grain inside and around bins.
  • As in any outdoor work, be careful not to raise any equipment such as ladders, poles or rods into power lines. Remember, non-metallic materials such as lumber, tree limbs, tires, ropes, and hay will conduct electricity depending on dampness and dust and dirt contamination.
  • Use qualified electricians for work on drying equipment and other farm electrical systems.
  • If you are on equipment that makes contact with a power line, do not exit the equipment. When you step off the equipment, you become the electricity’s path to ground and receive a potentially fatal shock. Wait until utility workers have de-energized the line and confirmed that it is safe for you to exit the vehicle. If the vehicle is on fire and you must exit, jump clear of the vehicle with both feet together. Hop as far from the vehicle as you can with your feet together. Keep your feet together prevents you from getting a shock.

Electrical work around the farm can also pose hazards. Often the need for an electrical repair comes at a time when a farmer has been working long hours and is fatigued. At such times it’s best to step back and wait until you’ve rested. Make sure you have the level of expertise required to do the electrical work, and never hesitate contact a qualified electrician when appropriate. Doing electrical work is also a good time to check your wires because mice and other animals tend to chew at them, leaving the electrical hazard of bare wires that can cause electrical shorts and potentially fatal shocks.