|Ground Fault Circuit Interrupters (GFCIs):||| Print ||
Prevention from Shock Hazards
What is a GFCIA ground fault circuit interrupter (GFCI) can help prevent electrocution. If a person’s body starts to receive a shock, the GFCI senses this and cuts off the power before he/she can get injured.
GFCIs are generally installed where electrical circuits may accidentally come into contact with water. They are most often found in kitchens, bath and laundry rooms, or even out-of-doors or in the garage where electric power tools might be used.
What is a ground fault?
According to the National Electrical Code, a “ground fault” is a conducting connection (whether intentional or accidental) between any electric conductor and any conducting material that is grounded or that may become grounded. Electricity always wants to find a path to the ground. In a ground fault, electricity has found a path to ground, but it is a path the electricity was never intended to be on, such as through a person’s body.
Because of this potential for shock, GFCI protection is used to protect human life.
How does a GFCI work?
The GFCI will “sense” the difference in the amount of electricity flowing into the circuit to that flowing out, even in amountsof current as small as 4 or 5 milliamps. The GFCI reacts quickly (less than one-tenth of a second) to trip or shut off the circuit.
What are the types of GFCIs?
There are three types of GFCIs. The most often used “receptacle-type” GFCI, similar to a common wall outlet, is the type with which most consumers are familiar. Additionally, circuit breaker GFCIs are often used as replacements for standard circuit breakers and provide GFCI protection to all receptacles on that individual circuit. Temporary or portable GFCIs are frequently used in construction and in outdoor settings with electric tools, mowers, trimmers, and similar devices. They should not be used as a permanent alternative to a regular GFCI. Temporary GFCIs should be tested prior to every use.
How should GFCIs be tested?
Many consumers don’t check their GFCIs to verify they are working. GFCIs are electronic devices that can be damaged or wear out. The electrical receptacle in a GFCI may continue to function, even if the GFCI circuit no longer works. If this is the case, have a qualified electrician replace it as soon as possible.
GFCIs should be tested monthly to ensure they are in working condition. Whether you have a receptacle or circuit breaker GFCI, pushing the TEST button should turn off the power to the circuit. For the receptacle-type GFCI, pushing the TEST button should cause the RESET button to pop up. (Remember to push the RESET button to re-establish power and protection.) For the circuit breaker-type GFCI, pushing the TEST button should cause the handle to move to the tripped position. (Remember to reset the handle to re-establish power and protection.)
When should you test GFCIs?
GFCIs should be checked monthly to determine if they are operating properly. A portable GFCI should be used out-of-doors with various electrical power tools (i.e., drills, mowers, trimmers) and should be tested before each use!
Where should GFCIs be used?
What is nuisance tripping of a GFCI?
It takes only 5 mA (0.005 A) of current leakage from the hot wire to the ground to cause a GFCI to trip. A small amount of leakage current may be difficult to avoid in some normal circuits. Hand-held power tools do not cause a tripping problem if the tool is maintained in good condition. Some stationary motors, such as a bathroom vent fan or fluorescent lighting fixtures, may produce enough leakage to cause nuisance tripping. Another problem may be a long circuit with many splices. If possible, keep GFCI circuits less than 100 feet long. To avoid nuisance tripping, a GFCI should not supply:
How does a GFCI differ from an AFCI?
Arc fault circuit interrupters (AFCIs) are safety devices for homes that provide enhanced protection from fires caused by unsafe home wiring conditions.
AFCIs should not be confused with GFCIs. While both AFCIs and GFCIs are important safety devices, they have different functions. AFCIs are intended to address fire hazards; GFCIs address shock hazards.